|
|
Test Bench Software
The software for the Test-Bench was coded in Visual Basic 6.0. The Entire Code could not be made available so I have uploaded some sample codes using which the entire code was developed. The code is made available in zip format.
1. Data Acquisition code (for one interface only). you will have to input the address of the interface in the code to read the data from that interface. The address of the interfaces is available on the data acquisition system page.
2. Relay card control. (Using this code all the relays connected to the system can be controlled with the mouse.)
3. Screenshot of the Final code. (opening Page)
4. Screenshot of the Final code. (Test Select Page)
5. Screenshot of the Final code. (No-Load test Page)
